尊龍凱時時代-708
產品說明
：
本品係采用優質的進口環保水性乳液
、水性增粘樹脂
、多種水性
助劑
，經過嚴格的科學實驗和先進的生產工藝精心研發的一種超
高性能純水性環保膠粘劑
，科技
、環保
、專業
。
外 觀：
乳白色乳狀液體
。
適用範圍
：
本品適用於紙/紙
、紙/膜
、PVC貼窗的強力粘接
。
產品特性
：
1
、塗刷性能強
、幹燥速度快、附著力好
、粘結強度大
2
、清洗方便
， 水衝洗即可
。
3
、耐冷熱性能佳
，粘接好的產品24小時後在高溫70℃烘烤72小
時或-20℃冷凍72小時粘接強度保持不變
，產品不爆膠
。
施膠方法
：手刷上膠
。
技術參數
：
固含量≥55% 、粘度=5500～8000mpa.s 、PH值=5～7 。
注意事項:
1
、對於挺度彈力太大的產品
，粘合後要求至少壓榨30分鍾
。
2
、注意膠水的開放時間
，建議10-20分鍾必須粘接
。
3
、使用本品的產品質量涉及諸多因素
，用戶應在使用前視產
品的具體情況進行試用
，合格後方可批量生產
。
貯存運輸
：
本品應存放於幹燥陰涼處
，貯存溫度為5〜35℃為宜
，有效
貯存期為半年
，超過貯存期如檢驗合格仍可使用
。
免責條款
：
由於貨品的使用
、操作
、貯存以及運輸等均不受本公司操控
，
本公司對貨品的使用性能
、效果及適用性均不負責
。本公司的
任何職員或代表均無權改動或放棄本條款
，如貴公司未能接受
此項免責條款
，請將貨品原裝退回
Product Description:This product adopts high-quality imported environment-friendly water-based lotion, water-based tackifying resin and various water-based
Additives, a kind of super-high-quality additives carefully developed through strict scientific experiments and advanced production processes
High performance pure water-based environmental protection adhesive, scientific, environmental protection and professional.
appearance:
Milky white milky liquid.
Scope of application:
This product is suitable for the strong adhesion of paper / paper, paper / film and PVC windows.
Product characteristics:
1. Strong brushing performance, fast drying speed, good adhesion and high bonding strength
2. Easy to clean, just rinse with water.
3. Good cold and heat resistance. The bonded products are baked at 70 ℃ for 72 hours after 24 hours
Or - 20 ℃ for 72 hours, the adhesive strength remains unchanged, and the product does not explode.
Sizing method: apply glue by hand.
Technical parameters:
Solid content ≥ 55%, viscosity = 5500-8000mpa. S, pH = 5-7.
matters needing attention:
1. For products with high stiffness and elasticity, it is required to press for at least 30 minutes after bonding.
2. Pay attention to the opening time of the glue. It is recommended that the glue must be adhered within 10-20 minutes.
3. The product quality of this product involves many factors. The user should inspect the product before use
Trial use shall be carried out according to the specific conditions of the products, and batch production can be carried out only after they are qualified.
Storage and transportation:
This product should be stored in a dry and cool place, and the storage temperature should be 5 ~ 35 ℃, which is effective
The storage period is half a year. If the storage period is exceeded, it can still be used.
Disclaimer:
Since the use, operation, storage and transportation of goods are not controlled by the company,
The company is not responsible for the performance, effect and applicability of the goods. Of the company
No employee or representative has the right to change or waive these terms and conditions, if your company fails to accept them
Please return the goods with original packaging for this exemption